Dosage:
Use 8 ounces per 1,000 gallons of water for minor leaks, A second bottle can be added for larger leaks.

Steps:
1. First determine water loss in a 24 hour period
2. Fill to original level, mark water line
3. Remove all cartridges or filtering devices
4. Slowly add Fix A Leak with pump running through skimmer
5. Recirculate for 6-8 hours. Shut system off
6. Check water level the following day
7. If level remains the same the leak has stopped
8. Allow 48 hours before resuming operation
9. It's recommended not the use spa till leak is fixed and the remainder of Fix A Leak is filtered out.

If Leak has slowed and not totally stopped you may add more product to increase strength of solution already in spa.

Follow steps 5-8 as before.

Product Note:
Normally Fix A Leak will seal holes 1/8" in diameter. The product requires pressure to ensure it's impacted into the area of the leak. Leaks created by a crack in a pipe in all probability will be sealed. The leak may reoccur due to vibration which in turn will migrate in size, recreating the leak. Most spas are foam insulated, and when saturated with water, will greatly delay the cure time of Fix A Leak. It would be best to drain spa, immediately wipe down shell with a damp cloth to remove any residue of Fix A Leak. Allow 3-5 days before refilling, in most cases this will allow the product to cure. This product will not cure leaks in plumbing that is cracked or damaged from freezing. Do not use in cedar hot tubs.